Product Details Portlet

D2X Detection Switch

A Switch with Crimp-type Connectors that Greatly Reduces Wiring Work

  • Clip-on wiring via AMP crimp-type connectors.
  • Snap-fit attachment for easy installation.
  • Operation possible from either side to enable mounting in either direction.
RoHS Compliant
Model 2D/3D CAD ECAD(Download symbol,FootPrint,3DCAD)
* External site (Ultra Librarian) opens in a new window.
D2X-C Download Download
(*) Ultra Librarian uniquely created ECAD data based on the information provided by OMRON. Please note that OMRON does not guarantee the accuracy, concurrence or completeness of ECAD data.
Note: This web page provides an excerpt from a datasheet. Refer to Product Datasheet and other applicable documents for more information.
Model D2X-C
Contact Form
30 VDC 0.1 A (resistive load)
The ratings values apply under the following test conditions:
Ambient temperature:20±2°C
Ambient humidity:65±5%
Operating frequency:30 operations/min

Permissible operating speed 0.1 mm to 100 mm/s
Permissible operating frequency Mechanical: 60 operations/min max.
Electrical: 30 operations/min max.
Insulation resistance 100 MΩ min. (at 250 VDC)
Contact resistance (initial value) 200 mΩ max.
Dielectric strength 250 VAC, 50/60 Hz for 1 min between terminals of same polarity
250 VAC, 50/60 Hz for 1 min between current-carrying metal part and ground
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Destruction:500m/s2{approx. 50G} max.
Malfunction: 300 m/s2 {approx. 30G} max.
Durability * Mechanical: 1,000,000 operations min.
Electrical: 50,000 operations min.
Degree of protection IEC IP00
Degree of protection against electric shock Class I
Proof tracking index (PTI) 175
Ambient operating temperature -10ºC to +70ºC (at ambient humidity of 60% max.)
(with no icing or condensation)
Ambient operating humidity 45% to 85% (for +5ºC to +35ºC)
Weight Approx. 1 g
Note: The data given above are initial values.
For testing conditions, consult your OMRON sales representative.
Unless specified, a tolerance of ± 0.4 mm applies to all dimensions.
The operating characteristics are for cases where the actuator operates in the A ( ) direction or B ( ) direction.
D2X:Dimensions1 D2X:Dimensions2

OF max.
RF min.
0.49 N {50 gf}
0.02 N {2 gf}
TTP min.
0.52 to 2.35 mm
6.34 mm


Correct Use

●Terminal Connection

Do not use the Switch with Connector mounted and weight load applied to the Connector and lead wire, otherwise it may rattle or may result in connection failure.